TECHNOLOGY CONTINUES TO DEVELOP
What are the basic safety requirements for mechanical equipment operators?
2021-10-19 09:23
To ensure that mechanical equipment does not have work-related accidents, not only the mechanical equipment itself must meet the safety requirements, but more importantly, the operator is required to strictly abide by the safety operation procedures.
Of course, the safety operation procedures of mechanical equipment vary according to their types, but their basic safety requirements are:
(1) must correctly wear moth good personal protective equipment. The dragon must wear fried. Don't wear anything you shouldn't wear. For example, when machining, female workers are required to protect their handbags. If they do not wear them, they may twist their hair in. At the same time, no gloves are required, if so.
The rotating part of the machine may tattooed the glove and wring the hand.
(2) Before operation, the mechanical equipment shall be inspected with safety gun. Moreover, it is necessary to run the car empty and confirm that it is normal before it can be put into operation.
(3) Mechanical equipment shall also be subject to safety inspection in accordance with regulations during operation. In particular, check if the fastened object is loosened by vibration for re-fastening.
(4) Mechanical equipment is strictly prohibited to run with faults and must not be used to prevent accidents.
(5) The safe installation of mechanical equipment must be used correctly according to regulations, and it is not allowed to be removed and not used.
(6) Tools, fixtures and processed military parts used in mechanical equipment must be firmly installed and must not be loose.
(7) When the mechanical equipment is in operation. Yan Ying adjusted by hand; It is also not allowed to measure parts by hand, or to moisten or clean up sundries. When the old and old are going on, the machinery and equipment should be shut down first.
(8) When the mechanical equipment is running, the operator shall not leave the work post to prevent problems from being handled by no one.
(9) after the end of the work. Turn off the switch, withdraw the cutting tools and workpieces from the working position, clean up the working site, put the parts, tools, etc. in order, and clean up the sanitation of the mechanical equipment.
recommend News
Address: No.2, 9B1, Jinxing 3rd Road, Jinyuan Industrial Zone, jinping district, Shantou City
Telephone: +86-754-88999968
Telephone: +86-754-88999958
Mobile:+86-13502974495
QQ:532682267/2399602483
WeChat Public
Mobile website
All rights reserved©Guangdong Xuri Electrical Equipment Co., Ltd.
SEO Powered by:www.300.cn
